• Entire construction is made of stainless steel (material no. 1.4301 - ANSI 304)
• Fixed illumination with "daylight" quality approximately 5,000° K
• Railing system for attaching holding devices such as camera holders, magnifier lamp holders etc.
• Inclusive two shockproof sockets 230 Volt (mounted on top of the illumnation System)
• Sturdy self-supporting subconstruction adjustable feet
• Work surface includes a seamlessly welded basin measuring 370 x 150 mm
• Mixing tap with extendable hand shower
• Very sturdy, perforated insertable working plates (approximately 10 mm lower), drilling D17, T60
• Air speed on the perforated surface: min. 0,4 m/sec
• Integrated exhaust van
• Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates
• Formalin sink with sieve insert
• Connection for waste water as well as hot and cold water
• Optionally height-adjustable from 850 to 1100 mm by means of an integrated electric drive

The UCS models include the following features:

• Dual working place
• Workstations with a large surface area
• Entire construction is made of stainless steel
• Stable, self-supporting undercarriage with adjustable legs
• Low overall height of the upper structure increases leg room
• Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm
• Basin includes integrated air vacuum
• Basin can be mounted to the right or left side
• Very sturdy, perforated and insertable working plates
• Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates
• Formalin sink with sieve insert
• Mixing tap with detachable cold and hot water shower´
• Exhaust duct left or right side

The UCS-E-1500 model includes the following features:

• Workstations with a large surface area
• Entire construction is made of stainless steel
• Height-adjustable from 750 to 1000 mm
• Stable, self-supporting undercarriage with adjustable legs
• Low overall height of the upper structure increases leg room
• Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm
• Basin includes integrated air vacuum
• Basin can be mounted to the right or left side
• Very sturdy, perforated and insertable working plates
• Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates
• Formalin sink with sieve insert
• Mixing tap with detachable cold and hot water shower
• Exhaust duct left or right side

The UCS-E-1500 with illumination includes the following features:

• Workstations with a large surface area
• Entire construction is made of stainless steel (Material no. 1.4301 - ANSI 304)
• Stable, self-supporting undercarriage with adjustable legs
• Low overall height of the upper structure increases leg room
• Height-adjustable from 750 to 1000 mm
• Height-adjustable with UP/Down push button
• Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm
• Basin includes integrated air vacuum
• Very sturdy, perforated and insertable working plates
• Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates
• Formalin sink with sieve insert
• Mixing tap with detachable cold and hot water shower
• Exhaust duct
• Build in Illumination with "Daylight" Quality approx. 5000°K for direct photograph without additional Flashlights
• 2x 230 Volt Electric socket outlet